Concrete Plasticizer – CapcoPlast PG06N

CapcoPlast PG06N is a plasticizer and water reducer used to increase the flowability of concrete/mortar without altering the water-to-cement ratio or to reduce the water-to-cement ratio without compromising flowability.

This product is manufactured in accordance with the general requirements of the Iranian National Standard No. 2930-1 and the performance requirements specified in Table 2 of the Iranian National Standard No. 2930-2. Additionally, this additive complies with Grade A requirements of ASTM C494 standard, Table 1 of EN 934-1 standard, and Table 2 requirements of EN 934-2 standard.

Download technical file
The advantages of using a concrete plasticizer include:
  • • Reducing the water-to-cement ratio in concrete results in uniform consistency and increased compressive strength at 7 and 28 days.
  • • Reduced water-to-cement ratio leads to decreased water absorption and permeability due to the reduction in water content relative to cementitious materials.
  • • Improved Cement Distribution, Enhanced Compaction Ability in Various Conditions, and Increased Compressive Strength at Equal Water-to-Cement Ratios.
The use of concrete plasticizers:
  • • Production and Implementation of Reinforced and Non-Reinforced Concrete
  • • Production of Cement-Based Mortars
  • • All types of Concrete Pouring at Normal Room Temperature
  • • Producing concrete with a water-to-cement ratio between 0.50 to 0.55 and initial slump of 5 to 8 centimeters.
  • • Manufacturing Precast Concrete Components under Standard Operating Conditions.
Range and Method of Using Additives in Concrete:

Permissible Range for Using Additives in Concrete:

The permissible range of using concrete plasticizer or CapcoPlast PG06N is from 0.5 to 1.5 percent by weight of cementitious materials (500 to 1500 grams per hundred kilograms of cementitious materials, including cement, silica fume, slag, fly ash, and other similar pozzolans). For information on the price of the concrete plasticizer, please visit the Copco Kala website. The determination of the optimal amount of additive should be based on the specifications of the mix design and the operational and weather conditions. Finally, conducting tests with trial mixes is essential. Exceeding the declared permissible limit may have consequences such as immediate increase in concrete setting time, especially for concrete containing retardant cements.

How to Mix Concrete Plasticizer :

To use the additive, it is necessary to dilute it with water in double the volume of the additive. Then, add it to the concrete when it has reached an initial slump of 5 to 8 centimeters. Additionally, the following points should be observed:

  • After adding the additive, the concrete should be thoroughly mixed for 2 to 5 minutes to ensure complete blending, and uniform distribution of the additive in the concrete.
  • This additive should not come into direct contact with dry cement or dry aggregate materials.
  • The volume of water used to dilute the additive (before adding it to the concrete) should be subtracted from the total mixing water in the concrete.
  • If there is a desire to significantly increase the slump of fresh concrete, the mix design must be formulated in a way that prevents segregation and excessive bleeding of the concrete.
Physical and Chemical Specifications of Concrete Plasticizer (CapcoPlast PG06N):
  • Physical State: Liquid
  • Color: Dark Brown
  • Chemical Base: Lignosulfonates
  • Density: 1.06 ± 0.02 g/cm³
  • Chloride Content: Negligible
  • Equivalent Alkali Content (Na₂O): 1.3%
  • pH 7 ± 1
  • Freezing Point: -3°C
Safety Precautions When Using Concrete Plasticizer:
  • • In case of contact with this additive in the eyes, the person should rinse the eyes with water for at least 15 minutes, keeping the eyelids open.
  • • In case of contact with this additive on the skin, promptly wash the contaminated skin with clean water for 15 minutes.
  • • Contaminated clothing should be washed with appropriate cleaning agents before reuse.
  • • If the affected person continues to experience discomfort, it is necessary to seek medical attention promptly.
Related Products

 — Our mission is to improve the quality of concrete —